USB TYPE C 5V 2.4A Active PoE Splitter Power Over Ethernet 802.3af 100mbps

10/100Mbps Ethernet)Active PoE Splitter 5V 2.4A/12Watt
USB TYPE-C PUTOUT 
Compliant with IEEE802.3af/at
With 2.5KV isolation 
Note: The POE splitter must be connected to the POE switch, POE midspan or 48V~52V POE injector for proper operation.The POE splitter is not suitable for PI 3B+,the one in the product picture is PI 4B.
Notice: Some managed intelligent Gigabit PoE switches need to set the LAN port of this connected splitter  to Manual 100Mb/s mode in the management Settings of switches,  otherwise the power supply may work normally but the network connection will not work, such as the following switch, HP 3500-48G-PoE yl Switch (J8693A)    RJ45 female INPUT Port: Support the IEEE 802.3af/at the Power over Ethernet PoE Switch  Support 48V Unsolicited Power Over Ethernet PoE Switch  Support 48V Unsolicited Power Over Ethernet PoE Adapter
Specification: Compliant with IEEE802.3af/at Isolation:2.5kV Power Input:DC44~57V Power Output:DC5V 2.4A Data&Power INPUT Port:from RJ45 female (Compliant with IEEE802.3af/at PoE) Data Output Port:RJ45 Male Power Output Port:USB Type-C Power Plug Data Transfer Rate:10/100Mbps  Data Pin: RJ45 pin 1236 Devices will be detected before poe input Power Pin:support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-) Body size: 80 x 27x 22 mm DC cable length:165mm RJ45 Modular Plug cable length:155mm Weight :55g
Operation Temperatue:-20℃ ~ 45℃ Storage Temperature:-30℃ ~ 70℃
Item Included:
10/100Mbps Active PoE Splitter(USB type-C Power Plug) x1